i-mas.Production and assembly Area 05 / 06

Industrial assembly from the first unit to production runs.

We transform components into finished products using reliable, efficient, and scalable industrial assembly processes.

Tell us about your project View the services
3D Production Bank: assembly of the six NEXO layers, optical inspection, and packaging for a limited series.
SERIES Production of NEXOFree rotation · 360°
A visual concept inspired by the i-mas Production and Assembly process. The six layers of the NEXO are assembled, designed for the Product page. The titanium casing receives thermal management, along with the PCB, chassis, optics, and glass. An optical check is illustrated, and a single unit is packaged. The animation then cycles automatically. You can rotate it by dragging, and return to the original view with a double-click. On the touchscreen, swipe outside the drawing to navigate to the next page.

01 / Purpose

Mechanical, electrical, and electronic assembly.

We have over 20 years of experience in the industrial sector, offering assembly solutions – mechanical, electrical, and electronic – for a wide range of products and industries.

We specialize in assembling prototypes, pre-series and short series, as well as complex and functional assemblies, paying close attention to every detail to ensure maximum quality, repeatability, and speed.

An i-mas technician assembling electronics for a batch of equipment
Batch production

A factory worker assembles electronic components for a range of equipment within our facilities in Montcada i Reixac.

02 / Services

What do we do in production and assembly?

You can either hire the entire process or a specific service. All of this is carried out by the same team, with the workshop and laboratory located nearby.

01

Product assembly

We assemble complete products using mechanical, electrical, and electronic components, ensuring functionality, overall coherence, and industrial quality from the very first unit.

02

Mechanical assembly

We perform mechanical assembly of components and sub-components, integration of parts, fastening systems, adjustments, and functional verification, ensuring robustness and repeatability.

03

Electrical and electronic assembly.

We integrate wiring, connectors, circuit boards, sensors, and actuators, paying close attention to order, traceability, and the overall reliability of the final system.

04

Prototypes, pre-series, and short films.

We prepare and assemble units for technical validation, market testing, or initial production runs, utilizing processes tailored to each stage of the product development cycle.

A series of open workstations on the assembly table, with the electronics and wiring visible.
Warehouse of finished product and pallets prepared in the i-mas warehouses in Montcada i Reixac.
Worker at i-mas packaging finished product next to the dispatch trolley.
A worker at the i-mas assembly station, with the units from the series in front of them.

03 / Capabilities

What we offer

Rapid manufacturing phase Saving on delivery times Higher quality Electronic and mechanical specialization Latest production technologies Regulations, certifications, and high quality. More than 10,000 square meters of facilities. Control of the entire manufacturing and supply chain.

Frequently Asked Questions

Who is responsible for putting together a series?

What is industrial assembly?

This involves transforming components into a finished product: mechanical, electrical, and electronic assembly, functional testing, packaging, and shipping. This is outsourced when the company that designs or sells the product does not have its own manufacturing facility. i-mas assembles prototypes, pre-series, and short series in five facilities in Montcada i Reixac and Mollet del Vallès, with its own in-house warehousing and shipping operations.

What’s the difference between a pre-series and a short series?

A pre-production run consists of the first units, usually dozens, used to validate the product and assembly process before committing to production. A short run is regular production of hundreds of units using an established process. At i-mas, the pre-production run results in a documented assembly procedure for production.

Can I outsource the assembly of a product that I already have designed?

Yes. We require the materials list, the drawings, and assembly instructions; if these are missing, a company with its own engineering department will complete them. Many clients come to i-mas with the product already designed and only externalize the assembly, quality control, and shipping.

Who buys the components when assembly is outsourced?

According to agreement: the client provides the material, or the assembler manages the purchase and stock. i-mas can control the entire chain: purchasing components, machining parts within their workshop, i-mas Electronics electronics, and stock management, or work with the material supplied by the client.

How is quality ensured in a task that has been subcontracted?

With functional verification performed on a unit-by-unit basis, and with each one individually recorded. When the product requires it, i-mas incorporates i-mas Vision’s machine vision systems for inspecting the assembly piece by piece. Because the same group designs, manufactures, and assembles the product, a failure is corrected in the design and does not recur.

Does the assembler also handle packaging and shipping?

It should, because this avoids moving the product twice. i-mas has finished-goods storage, prepares the final packaging and dispatches by courier or freight to the client’s chosen destination, in Spain or abroad. Products leave the premises ready for the end customer.

Let's talk

Do you have a project in mind?

If you have an idea, a project in progress, or you simply want to know how we can help you, we want to hear from you.

info@i-mas.com93 668 26 02

Monday to Thursday, from 9:00 to 18:00, and Friday from 9:00 to 15:00. We will respond to you within 24 hours.